Trailer Valet 5X

449.00$

The Trailer Valet 5X is the first and only tongue jack dolly system that provides you with the flexibility and maneuverability to pivot and move your trailer with ease. Its chain drive crank system allows you to propel your boat, utility, or horse trailer around the driveway or up an incline.

CHECK IT OUT

Description

Trailer Valet 5XPowerful Trailer Valet 5XTrailer Valet 5X

  • Patented drive system with high and low drive gears.
  • Automatic safety brake.
  • Folds up or down in seconds.
  • Moves up to 5000 pounds or 500 pounds tongue weight.
  • One year manufacturer’s warranty.
  • 300 hours of corrosion resistance.

SaleBestseller No. 1
Torin 1000 lbs Trailer Jack with Wheel, Heavy Duty Swivel Boat Trailer Jack Single Whee, 10" Lift,...
  • Swing-back bolt-on trailer jack easily raises and lowers any trailer up-to a 1/2 ton (1,000 lb) capacity
  • Adjustable height from 10-1/2" to 20-1/2" and fits trailer tongues 3" to 5"
  • Painted with Zinc, which is corrosion resistant; Convenient wind handle delivers fast, smooth cranking
  • Equipped with a sturdy 6" wheel that provides low-friction mobility, allowing you to move your trailer into position easily
  • Includes a limited 1 year manufacturer warranty
Bestseller No. 2
CURT 28250 A-Frame Trailer Jack, 5,000 lbs, 14-1/8 Inches Vertical Travel, CARBIDE BLACK POWDER COAT
  • DEPENDABLE STRENGTH - This A-frame trailer jack is rated for 5,000 lbs. support capacity and 3,000 lbs. lift capacity
  • VERTICAL RANGE - This trailer tongue jack allows for 14-1/8 inches of vertical movement and can be fully retracted for towing (10-3/8-inch retracted height, 24-1/2-inch extended height)
  • EASY OPERATION - This trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler
  • CORROSION-RESISTANT - For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish
  • SECURE INSTALL - This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included)
Bestseller No. 3
VEVOR 5000 lbs A-Frame Trailer Jack, 15" Vertical Travel, Adjustable Drop Leg, for Horse Trailer,...
  • Heavy-Duty Load Capacity: The VEVOR Electric Trailer Jack boasts an impressive lifting capacity of 5000 lbs, making it a powerful tool for lifting tasks. With a lifting range of 9.65 to 24.64 inches, it fits for no matter high-profile or low-profile trailers.
  • Easy Installation: Our trailer jack comes with all the necessary parts and detailed assembly instructions. It can be bolted or welded onto the trailer tongue and has a swivel function that allows it to swing up parallel to the tongue for easy maneuverability.
  • Designed for Stability & Durability: This trailer jack is engineered to deliver exceptional stability and long-lasting performance. Crafted from heavy-duty carbon steel, it offers maximum strength and rigidity. The galvanized inner and outer tubes and powder finish provide enhanced corrosion resistance.
  • Adjustable Height: Our trailer tongue jack offers 3-level adjustment, catering to your diverse needs. With multi-level adjustment, it ensures your trailer remains level at all times, ensuring a smooth towing experience! Say goodbye to trailer tilting.
  • Versatile Application: This powerful electric trailer jack is ideal for a wide range of applications. Whether you're lifting travel trailers, horse trailers, or multi-purpose trailers, it offers the strength and stability you needed. It features a detachable handle that can be used for manual operation in case of power outage or emergency situations.
SaleBestseller No. 4
Lippert Power Tongue Jack for A-Frame Travel, Cargo, and Utility Trailers or 5th Wheel RVs - 3,500...
  • EASY INSTALLATION — Complete with all necessary hardware and pins, installation for the Power Tongue Jack is fast and simple, so you can get to lowering and raising your equipment in no time
  • TIME-SAVING — Say goodbye to cranking your manual jack. With the push of a button, you can raise or lower your a-frame trailer in a fraction of the time, without breaking a sweat
  • INTEGRATED LIGHTING — Four integrated LED lights illuminate the ball and coupler, so you can operate your jack at night, worry-free
  • POWERFULLY ENGINEERED — Built to do heavy lifting, the Power Tongue Jack has a 3,500 lb. lift capacity, helical-cut gears, 30 AMPs of power, and a 12V motor — all designed to get the job done, quietly and efficiently, so you don't have to
  • BUILT TOUGH — Made from heavy-gauge, steel construction, a durable, textured housing that prevents chips and cracks, and a black powder-coat finish — this jack was designed to operate, day after day
Bestseller No. 5
Kohree Electric Trailer Jack 3700lbs, Heavy Duty RV Electric Power Tongue Jack Max 4000lbs for...
  • 【MAX. CAPACITY 4000LBS TESTED】Built in 12V DC electric gear motor of a low maintenance, Kohree power tongue jack helps you lift trailer stably UP TO 4000LBS.
  • 【SAVING ENERGY & 50% TIME】Just push the button of the rv electric jack to raise or lower any A-frame trailer automatically more quickly. It takes 47s to lift 8 inches, compared to 84s for other products. Without harsh sound & easier than hand cranking. No longer annoyed by sore arms and shoulders.
  • 【ADJUSTABLE HEIGHT】Adjustable 5 gear drop leg make 12V trailer jack increase 8" height to meet the different lifting needs. Max extended height is 22” lift, fully retracted in 9".
  • 【SAFE OPERATION】With 2 LED lights for convenient and safe night time hookup, the camper jack also has a built-in circuit breaker. If in accident, it will disconnect automatically & reconnect about 2 mins later.
  • 【WIDE APPLICATION】The electric tongue jack is made of heavy-duty steel with anti-rust coating on the outside, and equipped with a hand crank & Weatherproof Jack Cover, great for rv, 5th wheels, any A-frame trailer and camper.
Bestseller No. 6
VEVOR 1000 lbs Trailer Jack with Wheel, Heavy Duty Swivel Boat Trailer Jack, 10" Lift, Bolt-on...
  • Heavy-Duty Load Capacity: The VEVOR trailer jack boasts an impressive lifting capacity of 1000 lbs, making it a powerful tool for lifting tasks. With a lifting range of 12.75 to 22.75 inches, it fits for no matter high-profile or low-profile trailers.
  • Easy Installation: Our boat trailer jack comes with all the necessary parts and detailed assembly instructions. It can be bolted or welded onto the trailer tongue and has a swivel function that allows it to swing up parallel to the tongue for easy maneuverability.
  • Designed for Stability & Durability: This trailer jack stand is engineered to deliver exceptional stability and long-lasting performance. Crafted from heavy-duty carbon steel, it offers maximum strength and rigidity. The galvanized inner and outer tubes and powder finish provide enhanced corrosion resistance.
  • Powerful PP Tire: The trailer tongue jack is equipped with a PP tire that provide a larger surface area for smooth and stable movement. The tire is more stable and less prone to sinking. It can withstand mud, gravel, and sharp rocks without getting stuck or damaged. The tread pattern helps prevent sliding on wet surfaces.
  • Versatile Application: This powerful boat jack is ideal for a wide range of applications. Whether you're lifting travel trailers, horse trailers, or multi-purpose trailers, it offers the strength and stability you needed. It features a detachable handle that can be used for manual operation in case of power outage or emergency situations.
SaleBestseller No. 7
CURT 28200 A-Frame Trailer Jack, 2,000 lbs, 14-1/4 Inches Vertical Travel, CARBIDE BLACK POWDER COAT
  • DEPENDABLE STRENGTH - This A-frame trailer jack is rated for 3,000 lbs. support capacity and 2,000 lbs. lift capacity
  • VERTICAL RANGE - This trailer tongue jack allows for 14-1/4 inches of vertical movement and can be fully retracted for towing (8-1/4-inch retracted height, 22-1/2-inch extended height)
  • EASY OPERATION - This trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler
  • CORROSION-RESISTANT - For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish
  • SECURE INSTALL - This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included)
Bestseller No. 8
MaxxHaul 70148 10" Lift Swing Back Trailer Jack with Single Wheel - 1000 lbs. Capacity
  • Versatile Trailer Support: Designed for utility and boat trailers, these bolt-on trailer jacks provide essential support during loading, unloading, and stationary storage.
  • Space-Saving Swing Back Design: This design optimizes space and allows you to use your trailer without uninstalling the trailer jack.
  • Secure Locking Mechanism: A heavy-duty pull pin securely locks the jack into either horizontal or vertical positions. This dependable mechanism guarantees stability during operation and when the jack is stowed.
  • Convenient Vertical Lift: Offering a 10" vertical lift, this trailer tongue jack is equipped with a side wind handle featuring a swivel grip for user-friendly operation. Raising and lowering becomes effortless.
  • Smooth-Rolling Nylon Wheel: A 6" diameter x 2" wide nylon wheel ensures smooth rolling across various surfaces, facilitating maneuverability and minimizing friction during trailer adjustments.
Bestseller No. 9
Bastion Electric Power Tongue Jack with Cover | Electric or Manual Operation | 3500LB A-Frame...
  • This Listing Is For One New Power Tongue Jack With A Water Resistant Cover.
  • This Electric Jack Also Includes Star Washers, A Cotter Pin, A Safety Pin, & A Manual Crank Handle.
  • This Model Offers Front-End Illumination, Water Resistant Switches, & Speedy Operation & Stability In Its 6" Wide Base.
  • 18" Stroke & A Retracted Height Of 29" With The Foot Pad Extension.
  • For User Safety & To Avoid Damaging Of Internal Components, An Internal 25A Auto-Reset Breaker Is Installed In Each Jack.
SaleBestseller No. 10
Lippert Quick Drop Tongue Jack for A-Frame Travel, Cargo, and Utility Trailers or 5th Wheel RVs,...
  • IMPORTANT*** Power drill and ¾” socket head not included. Do not use an impact drill for operation.
  • Patent Pending
Bestseller No. 11
LCyindu 3500lbs Power Tongue Jack A-Frame Electric Trailer Jack with Waterproof Cover for Camper,...
  • 💪【𝑭𝒊𝒏𝒂𝒍𝒍𝒚 𝒏𝒐 𝒎𝒐𝒓𝒆 𝒄𝒓𝒂𝒏𝒌𝒊𝒏𝒈 】Are you tired of turning the handle to raise and lower your trailer? Instead of a manual jack, you can try an electric trailer jack.This electric tongue jack is equipped with a built-in 150W low-maintenance electric gear motor, which can quickly lift 10 inches within 50 seconds.The heavy duty RV electric power tongue jack has a maximum load-bearing capacity of 3500lbs and a maximum stroke of 18 inches.
  • 💪【𝑫𝒖𝒂𝒍 𝑳𝑬𝑫 𝑾𝒐𝒓𝒌𝒊𝒏𝒈 𝑳𝒊𝒈𝒉𝒕𝒔】On both sides of the head motor of the electric jacks for trailers, there is an LED light installed on each side. The electric camper jacks has red switch to control the light, making it convenient for night-time operation and use.
  • 💪【𝑬𝒂𝒔𝒚 𝒊𝒏𝒔𝒕𝒂𝒍𝒍𝒂𝒕𝒊𝒐𝒏 𝒂𝒏𝒅 𝑺𝒂𝒇𝒆】Connect the red positive lead to the positive terminal of the battery and connect the black ground wire to negative terminal of the battery.The electric A-frame trailer jack has an over load protection to shut off power that will auto reset in 15 seconds. WARNING: When using an extension wire, DO-NOT use smaller than #10 gauge wire.
  • 💪【𝑫𝒖𝒓𝒂𝒃𝒍𝒆 𝒂𝒏𝒅 𝑨𝒅𝒋𝒖𝒔𝒕𝒂𝒃𝒍𝒆】The trailer jacks is made of heavy-duty steel, with galvanized interior and adjustable footboard. The surface is treated with spray coating, which effectively prevents rust and extends the service life. It is equipped with 6-inch diameter quick extension feet, and the height can be adjusted between 27.11-50 inches. The inner tube diameter is 2 inches, the O.D. is 2.25 inches, working voltage is 12V DC, with a working current of less than 30A.
  • 💪【𝑾𝒊𝒅𝒆 𝑨𝒑𝒑𝒍𝒊𝒄𝒂𝒕𝒊𝒐𝒏】The electric trailer tongue jack is fit for any A-frame trailer, RV, travel trailer,5th wheels,boat, cargo trailer,car hauler,utility trailer and camper.The 3 bolt electric trailer jack can be manually operated and comes with a socket that can match a regular household wrench. First, remove the dust cover on the top of the jack, then insert the wrench into the inspection hole and tighten the drive screw.
SaleBestseller No. 12
VEVOR Electric Trailer Jack, Power Tongue Jack Weight Capacity 4000 lbs, 9.84'-33.85' Electric...
95 Reviews
VEVOR Electric Trailer Jack, Power Tongue Jack Weight Capacity 4000 lbs, 9.84"-33.85" Electric...
  • Heavy-Duty Load Capacity: The VEVOR electric trailer jack boasts an impressive lifting capacity of 4000 lbs, making it a powerful tool for lifting tasks. Provide reliable support for your towing needs!
  • Quality You Can Trust: Constructed from durable carbon steel with a protective coating, our power tongue jack ensures long-lasting performance and a new-like appearance. It's designed to withstand splashes and tough outdoor conditions.
  • Provide All You Need: The electric tongue jack comes with a sunshade waterproof cover, protecting against water and UV rays to prevent product aging. The 90° rotating installation hole prevents interference with the tailgate, ensuring a hassle-free installation process. Enjoy peace of mind knowing your tailgate will remain level.
  • Multi-level Adjustable Height: Our electric trailer tongue jack offers multi-level adjustable height, allowing you to keep your trailer level on various road surfaces. It fits for no matter high-profile or low-profile trailers. Say goodbye to trailer tilting.
  • Versatile Application: This power trailer jack is perfect for a wide range of applications. Whether you're lifting RV trailers, horse trailers, or utility trailers, it provides the strength and stability you need for effortless towing. In case of a power outage, the electric jack for trailers is equipped with a hand crank for emergency use.
Bestseller No. 13
BIG RED 2000 LBs Capacity Weld on Pipe Mount Swivel Trailer Jack, ATR39003R
  • Swing-back tube mount trailer jack easily raises and lowers any trailer up-to a 1 ton (2,000 lb) capacity
  • Adjustable height from 10-1/2" to 20-1/2" and fits trailer tongues 3" to 4"
  • Painted with Zinc, which is corrosion resistant
  • Convenient wind handle delivers fast, smooth cranking
  • Includes a limited 1 year manufacturer warranty
Bestseller No. 14
Bastion Distribution Power Tongue Jack | Electric or Manual Operation | A-Frame 3500LB Capacity |...
  • This Listing Is For A Bastion Distribution Electric Power Tongue Jack.
  • This Jack Features A 3500lb Capacity A-Frame, A Front-Facing LED Light For Night Operation, An Extendable Footpad, Star Washers, Safety & Cotter Pin, & A Crank Handle For Optional Manual Use.
  • This Jack Comes With A One-Year Limited Warranty.
  • This Jack Is Great For Campers, Trailers, Boats, & Many More Applications.
  • Replaces Part Number BJ3500B
Bestseller No. 15
POLESTAR 5000LB Electric Power A- Frame Tongue Jack for Trailer Camper, RV, 12V DC with Hard Wiring
  • Powered A-Frame Jack with heavy duty 5000 lbs. lift capacity.
  • Powerful 12 DC Motor provides maximum torque to raise or lower your a-frame trailer in a fraction of the time.
  • This unit has a built-in circuit breaker which automatically trips and resets if the amperage is too high.
  • New industrial design cover is extremely waterproof. Improved LEDs shine down onto your ball and coupler where light is needed the most.
  • SPECIFICATIONS: Retracted Length: 9", Extended Length: 27", (Plus 4.5" drop leg), Jack Tube Outer Dia: 2.25"
Bestseller No. 16
ROAD DAWG A-Frame Trailer Jack, 2,000 LBs Capacity, 14 Inches Vertical Travel, Top-Wind Handle...
  • Impressive Lift Capacity and Adjustable Height: This A-frame trailer jack boasts a 2,000 lb (1 ton) lift capacity and offers a 14-inch vertical travel range(Retracted Height: 10-1/2 inches 267 mm Extended Height: 24-3/4 inches 629 mm), ensuring smooth and fast lifting while providing versatile, functional support for your camper or RV.
  • Durable and Corrosion-Resistant Construction: Made from high-quality, zinc-plated, corrosion-resistant steel, this trailer tongue jack delivers dependable performance and superior durability for long-lasting protection.
  • Secure and Easy Installation: Designed to be bolted or welded onto the A-frame coupler, this trailer jack ensures a safe and sturdy installation, making towing and coupling a breeze.
  • Convenient Top-Wind Handle: Featuring a top-wind handle with an integrated grip, this A-frame trailer jack allows for easy and efficient height adjustment, enhancing your towing experience.
  • 1 Year Manufacturer Warranty: Enjoy peace of mind with a limited 1-year manufacturer warranty, ensuring the quality and reliability of this corrosion-resistant, easy-to-install, and dependable trailer jack for your camper or RV.
Bestseller No. 17
Weize 3500 Lb. Power Tongue Jack, Heavy Duty Electric Trailer Jack with 600D Polyester Protective...
  • Durable and Sturdy: Heavy-gauge steel construction ensures durability and strength; Black powder coat finish resists rust and corrosion; Durable, textured-housing prevents chips and cracks.
  • Weize electric jack lets you raise and lower your A-frame trailer quickly and easily. 3,500 lbs. lift capacity, a low maintenance 12V DC electric gear motor. Provides 18” lift, retracted 9 inch, extended 27”, drop leg extra 5-5/8” lift. Outer tube dia.: 2-1/4", inner tube dia.: 2".
  • To ensure great performance even at night, this jack also comes with a front-facing LED light .The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power.
  • Come with electric tongue jack protective cover: the cover measures 14″(H) x 5″(W) x 10″(D), it can work with most electric tongue jacks. 600D Polyester Fabric features high tear strength, that is durable and long lasting. Adjustable both-side pulling drawstring with barrel cord lock holds the cover securely in place, keeps your electric tongue jack dry and protects the casing, switches, and light from the elements.
  • Warranty: Meets international quality standards. 1 YEAR WARRANTY, don't hesitate to call us if you have any questions, our support team is on standby for YOU.
Bestseller No. 18
Kohree RV Electric Trailer Jack 5000lbs, Upgraded Electric Power Tongue Jack with Waterproof Cover &...
  • 【MAX LOAD CAPACITY 5000LBS】Kohree electric trailer jack built powerful 12 DC motor provides maximum torque to raise or lower your a-frame trailer in a fraction of the time.
  • 【EASY TO USE】Just push the button of the RV electric jack to raise or lower any A-frame trailer automatically more quickly. If you have any questions about operating, Kohree service team will give you help.
  • 【SAFE & DURABLE】With 2 LED lights for convenient and safe nighttime hookup, the tongue jack also has a built-in circuit breaker. If the amperage is too high, it will disconnect automatically & and reconnect about 2 mins later.
  • 【ADJUSTABLE HEIGHT】Adjustable 5 gear drop leg makes 12V trailer jack increase 8" height to meet the different lifting needs. Max extended height is 22” lift, fully retracted in 9.8".
  • 【WIDE APPLICATION】The electric tongue jack is made of heavy-duty steel with anti-rust coating on the outside and is equipped with a hand crank and weatherproof Jack Cover, great for RV, 5th wheels, any A-frame trailers, boats, and campers.
Bestseller No. 19
Reese 1400300303 Pro Series Bolt-On Jack , Black
  • Topwind Jack
  • Part number: 1400300303
  • Package Weight: 6.26 kilograms
  • Oem equivalent part number: FCJM1400300303
Bestseller No. 20
MaxxHaul 70149 Trailer Jack with Dual Wheels - 26-1/2" to 38" Lift Swing Back - 1500 lbs. Capacity...
  • Essential Trailer Support: Specifically designed for utility and boat trailers, these bolt-on trailer jacks provide indispensable support for various trailer-related tasks
  • Swing Back Space Optimization: Featuring a swivel or swing back bracket, this jack can be effortlessly positioned out of the way when not in use. This design allows you to use your trailer without uninstalling the trailer jack for hassle-free operation
  • Dependable Locking Mechanism: The heavy-duty pull pin securely locks the jack into either horizontal or vertical positions, ensuring stability during operation and storage
  • Convenient Vertical Lift: With an 11-1/2" vertical lift, this trailer tongue jack comes equipped with a side wind handle that features a swivel grip. This ergonomic design makes raising and lowering hassle-free
  • Dual Wheels for Maneuverability: Equipped with two 6" diameter x 2" wide nylon wheels, this trailer jack offers smooth and efficient movement. The dual-wheel configuration enhances maneuverability, even with heavier loads

Last update 2022-10-17 at 11:53