Yakima FrontLoader Bike Rack

The Yakima FrontLoader is a rooftop bike rack that comes with a durable and sturdy design. You will be able to carry almost every type of bike with it. Moreover, you don’t have to remove your bike’s front wheel to carry it with this rack. It can carry your bike contacting with the wheels and tires.

Save
Save

CHECK IT OUT

Description

Yakima FrontLoader Bike RackYakima FrontLoader Bike Rack

With this Yakima FrontLoader, you don’t have to worry about your bike being scratched or damaged. But the rack comes with a relatively higher loading height than the fork mount racks. The FrontLoader is easier to use than a fork-mount rack for cars with low roof heights because, on the FrontLoader, the front wheel stays on. But for the vehicles with higher roofs, it is a little difficult to lift the bike high enough while maintaining the proper vertical angle to get a bike into the rack.

The FrontLoader is very easy to install. Moreover, the installation does not require any tools. This bike rack is compatible with almost any type of roof crossbar. A large hand knob on the rack’s front end is turned, which draws the front clamp up snugly around the crossbar. It is easier to use than the U-Bolt setup or the strap clamps. The front tire clamp is not able to accommodate tires over 3″ in width. So you cannot carry fat bikes or some plus bikes with larger tires with the FrontLoader.

The FrontLoader comes fully assembled. You have to place the rack on your roof for attachment to the crossbars. There are no included lock cores available in this bike rack. So if you want to install lock cores to increase the rack’s security system, you will need to purchase lock cores from Yakima. It is a one-time job, and it will take about 5 minutes.

The FrontLoader comes with a good design, and it is a sturdy rack. There are many plastic components used in this rooftop bike rack, including the crossbar clamping mechanism.

So if you are looking for a rooftop bike rack at a good value, you can take this.

YAKIMA - FrontLoader Wheel-On Mount Upright Bike Carrier for Roof Racks, 1 Bike Capacity
  • Carry any bike: Fits virtually any type of bike, including disc brakes, thru axles, and full suspension bikes; Fits 20" to 29" wheels and tires up to 3"
  • Easy loading: Load your bike fully assembled on this wheel-on mount; FrontLoader holds your bike upright as you secure it
  • Roof rack required: Crossbar spread must be between 16" and 48"; Fits Yakima round, square, factory or aerodynamic crossbars; Fully assembled out of the box and easy, tool-free installation
  • No frame contact: FrontLoader holds the bike by the front and rear wheel; No frame contact makes it a great option for carbon fiber and custom paint jobs
  • Protect your gear: 2 SKS (Same Key System) locks (sold separately) can be added to lock your bike to the mount and the mount to the base rack

Bestseller No. 1
Yakima - RidgeBack Tilt-Away Hitch Bike Rack, 2 Bike Capacity
  • SMART DESIGN: UpperHand lever tilts the rack down to access the back of your vehicle and folds flat for easy storage; Carries up to 2 bikes
  • DURABLE, STABLE, SECURE: Zero-hassle ZipStrips secure the bikes to the rack and are fully removable; Anti-sway cradle design minimizes bike-to-bike contact
  • EASY INSTALL: Tool-free SpeedKnob quickly tightens and locks the rack to your car; Fully assembled; Easy 5 minute install
  • SIMPLE TO STORE: Folds flat for easy storage; 1-1/4" or 2" hitch receiver required
  • ROAD TRIP READY: Yakima signature bottle opener lets you enjoy a post-ride cold one
Bestseller No. 2
YAKIMA, DoubleDown 4 Hitch Mount Tilting Bike Rack, 4 Bike Capacity
  • CARRY ANY BIKE: DoubleDown 4 is a hanging rack, which allows you to carry any type of bike with traditional frame geometry (bikes with slanted top tubes require TubeTop adapter, sold separately)
  • SIMPLE AND SECURE: Easy to install, load, and tilt out of the way when not in use; TriggerFinger technology lets you fold down the arms with one press of a button
  • HITCH REQUIRED: Compatible with both 1-1/4” and 2” hitch receivers (class I, II, and III) right out of the box
  • SMART DESIGN: Standard SwitchBlade anti-sway cradle eliminates bike-to-bike contact, preventing interference and scratches; Durable powder coat finish
  • PROTECT YOUR GEAR: Add a DeadLock (sold separately) to lock your bikes to your hitch mount and the hitch mount to your vehicle
Bestseller No. 3
YAKIMA - FourTimer Hitch Mount Tray Bike Rack, 4 Bike Capacity
105 Reviews
YAKIMA - FourTimer Hitch Mount Tray Bike Rack, 4 Bike Capacity
  • CARRY ANY BIKE: Fits any frame design, suspension, and wheel size; Ideal for kids' bikes, bikes with fenders, and fat bikes (require FatStraps, sold separately)
  • 2 OR 4 BIKE CAPACITY: Super adaptable design for your carrying needs; Converts from a 4 rack to a 2 bike rack in minutes; Maximum bike weight of 45 lbs. (total load of 180 lbs.)
  • HITCH REQUIRED: Fits 2" hitch receivers only; SKS (Same Key System) Hitch lock included to protect your gear
  • OUT OF THE WAY: Folds down with bikes loaded so you can access your vehicle's trunk or hatch; Folds up when not in use
  • EASY TO USE: Low tray height makes it quick and easy to load and unload your bikes
Bestseller No. 4
YAKIMA - HoldUp EVO 2" Hitch Mounted Tray Bike Rack, 2 Bike Capacity
  • BUILT TO HANDLE NEW BIKE STANDARDS: Fits most bikes, including fat tires, boost hubs, mountain, road, hybrid, women's specific, BMX kids' bikes and E-bikes under 50 lbs.
  • FAST, SECURE, EASY TO USE: Tool-free locking SpeedKnob makes installation and removal fast, easy and secure; Integrated SKS (Same Key System) locks included for added bike security
  • QUICK REAR-OF-VEHICLE ACCESS: Easy-access tilt mechanism and KickStart foot pedal make raising and lowering the rack a breeze, even with bikes loaded
  • SMART DESIGN: StrongArm hook secures bikes at the wheel, protecting your painted and carbon frames; Easily adjust trays to reduce bike-to-bike interference
  • FIT ANY BIKE: Securely carries 20" to 29" wheels, tires up to 4.8" wide, and accommodates disc brakes, thru-axles, and full suspension bikes
SaleBestseller No. 5
YAKIMA - Dr.Tray Hitch Mount Tray Bike Rack, 2 Bike Capacity, 2"
  • CARRY 2 BIKES: Fits road, mountain and fat-tire bikes; Securely carries 26" to 29" wheels and tires up to 4.8" wide; 40 lbs. maximum weight per bike
  • UNRIVALED SPACING: Up to 18" of space between each bike; Tray spacing can be adjusted (tool-free) while the bikes are loaded, eliminating any bike-to-bike interference
  • EASY TO USE: Raise and lower the rack easily with the RemoteControl tilt lever; Lightweight aluminum design
  • SECURE YOUR GEAR: Tool-free locking SpeedKnob for quick and easy installation to your vehicle; Included SKS cable lock system secures each bike's wheels and frame
  • ADD 1 MORE: Need to carry a third bike? Add the EZ+1 Extension (sold separately) to carry 3 bikes total
Bestseller No. 6
YAKIMA, TwoTimer Tray Hitch Bike Rack, Great for Fat Bikes, Bikes with Fenders, Women's Specific...
  • FITS ALMOST ANY BIKE: Transport 2 bikes regardless of frame design, suspension or wheel size; Ideal for kids' bikes, fenders and fat bikes (ZipStraps required for carrying fat bikes; sold separately)
  • EASY LOAD/UNLOAD: Low tray height for quick and easy loading and unloading of bikes; Fold down with bikes loaded for rear-of-vehicle access
  • PROTECT YOUR GEAR: Secures bikes by the frame with padded arms; Folds up when not in use
  • THE NUTS AND BOLTS: Maximum bike weight 45 lbs. (total maximum load 90 lbs.); Fits 1 1/4" or 2" hitch receiver right out of the box
  • TRANSPORT MADE SIMPLE: Not all bikes were created equally - the TwoTimer makes hauling your favorite bikes a breeze
Bestseller No. 7
Yakima - ForkLift Fork Mount Bike Carrier for Roof Racks, 1 Bike Capacity
  • FITS MOST DISC BRAKES: Fits bikes that use standard 100 mm x 9 mm quick release front hubs; other hubs (such as thru-axles) require adapters
  • ADJUSTABLE LENGTH: Sliding wheel tray is easy to adjust and allows for a wide range of bike lengths; Carries 1 bike up to 35 lbs.
  • ROOF RACK REQUIRED: Crossbar spread minimum of 16" and maximum of 42"; Fits Yakima round, square, factory and aerodynamic bars; Simple tool-free installation and removal
  • NO FRAME CONTACT: ForkLift holds the bike by the front axle and the rear wheel; No frame contact means your bike's paint doesn't get scratched
  • PROTECT YOUR GEAR: Add SKS (Same Key System) locks (sold separately) to secure your bike to the rack and the rack to the vehicle
Bestseller No. 8
YAKIMA - FrontLoader Wheel-On Mount Upright Bike Carrier for Roof Racks, 1 Bike Capacity
  • Carry any bike: Fits virtually any type of bike, including disc brakes, thru axles, and full suspension bikes; Fits 20" to 29" wheels and tires up to 3"
  • Easy loading: Load your bike fully assembled on this wheel-on mount; FrontLoader holds your bike upright as you secure it
  • Roof rack required: Crossbar spread must be between 16" and 48"; Fits Yakima round, square, factory or aerodynamic crossbars; Fully assembled out of the box and easy, tool-free installation
  • No frame contact: FrontLoader holds the bike by the front and rear wheel; No frame contact makes it a great option for carbon fiber and custom paint jobs
  • Protect your gear: 2 SKS (Same Key System) locks (sold separately) can be added to lock your bike to the mount and the mount to the base rack
Bestseller No. 9
Yakima - RaptorAero Wheel-On Mount Upright Bike Carrier for Roof Racks, 1 Bike Capacity
  • CARRY COMPLETE BIKE: A great option for bikes with traditional frame geometry and bikes with fenders; No front wheel removal necessary
  • FITS MOST BIKES: Fits 1" to 3" diameter downtubes; Accommodates disc brakes, thru-axles, and full suspension; Carries 1 bike up to lbs. at minimum 16" crossbar spread
  • ROOF RACK REQUIRED: Crossbar spread must be between 16" and 38" for carrying 1 to 2 bikes (18" to 38" for carrying 3 or more bikes); Fits Yakima round, square, factory, or aerodynamic bars
  • SMALL BUT MIGHTY: Lightweight construction and a streamlined profile; RaptorAero is as easy to use as it is unassuming; Tool-free installation
  • PROTECT YOUR GEAR: SKS (Same Key System) locks (sold separately) can be added to lock your bike to the mount and the mount to the base rack
Bestseller No. 10
Yakima Hangout 2 Bike Rack
  • QuickTrigger hub system makes install easy and fast
  • Integrated stable cradles hold bikes firmly in place
  • Padded feet and coated metal buckles protect your vehicle
  • Available in 2 or 3 bike carrying capacities
  • Arms fold for compact storage
Bestseller No. 11
YAKIMA - FullBack Premium Trunk Bike Strap Rack, 3 Bike Capacity
  • Modern design complements today's vehicles, bikes and cyclists
  • SuperCush ZipStrip cradles allow for premium bike protection
  • Four-strap design for easy installation
  • Enhanced vehicle fit achieved through external frame construction and padding
  • Full SKS locking package locks rack to vehicle and bikes to rack to help prevent theft
Bestseller No. 12
YAKIMA, Hangover Vertical Hitch Rack for Suspension Fork Bikes, 6 Bike
  • MORE BIKES, LESS SPACE: Made of heavy-duty steel with a vertical orientation; Transports up to 6 bikes with suspension forks using minimal space, no multiple racks or trailers required
  • CONVENIENT CARRYING: Foot-operated tilt mechanism changes rack position for easy loading and unloading; Tilts down and out of the way for easy rear-of-vehicle access with bikes unloaded
  • SUPPORTS AND PROTECTS: Securely supports bikes and fat bikes by the fork crown (required for use); Soft padding protects the fork's finish; Rotating wheel cup accommodates bikes with various wheelbases
  • IMPROVED GROUND CLEARANCE: 3 mast height positions for improved ground clearance and ease of loading; 3 mast angles to avoid bike-tire contact with your vehicle
  • NUTS AND BOLTS: Fits suspension-fork bikes only; Fits 2" hitch receivers only; HitchLock included; Built-in bottle opener
Bestseller No. 13
YAKIMA - SpareRide, Bicycle Rack, Turns Your Rear Mounted Spare Tire Into A Rack, 2 Bike Capacity
  • SPARE TIRE BIKE RACK: Easily attaches to your rear mount spare and turns it into a bike rack; SuperCush ZipStrip cradles make loading and unloading bikes a breeze; Fits nearly any stock size spare
  • HOLDS 2 BIKES: ZipStrips secure bikes to the rack and are fully removable; Anti-sway cradle designed to stop bikes from bumping into one another; Includes full SKS locking package
  • DURABLE DESIGN: Steel construction is strong and durable; TireTread pads add stability and protection; Bikes over 35 lbs should not be carried
  • EASY INSTALL: Basic assembly required; Universal mounting plate with extension fits most lug patterns
  • WE’VE GOT YOUR BACK GUARANTEE: Covered by our Limited Lifetime Warranty
Bestseller No. 14
YAKIMA - TubeTop Hitch Mounted Bike Rack
  • Rack up your bike: The handy TubeTop makes your bike compatible with most mast-style hitch racks; Works with bikes that have sloped top tubes, such as mountain bikes, cruisers and more
  • Simple and effective: Installs quickly and securely to your seat post and stem to adapt a wide range of bikes for transport
  • Highly secure: Keeps your bike mounted solidly on single and dual arm mounts; Oversized diameter tubing and anti-rotation inserts for greater stability
  • 1 bike capacity: Use it with 1 bike weighing up to 45 lbs; Large molded collars are gentle with your bike stem and seat post
  • We’ve got your back guarantee: Covered by our Limited Lifetime Warranty
Bestseller No. 15
YAKIMA - HighRoad Wheel-On Mount Upright Bike Carrier for Roof Racks, 1 Bike Capacity
  • Carry any bike: Secure, sleek and simple to use; Carry almost any road or mountain bike; Fits 26" to 29" wheels and 23 mm to 4" tires with no adjustment
  • Streamlined protection: Low profile tray minimizes hatch interference; No wheel removal and no contact with the bike frame (an ideal option for carbon fiber bikes and custom paint jobs)
  • Roof rack required: Crossbar spread must be between 18" and 35"; Tool-free, universal mounting hardware fits most roof racks; T-Slot compatible with SmarT-Slot conversion kit (sold separately)
  • Easy to use: New integrated TorqueRight tightening knob is quick and easy to adjust and secures your bike with precision
  • Protect your gear: 2 SKS (Same Key System) locks (sold separately) can be added to lock your bike to the mount and the mount to the base rack
Bestseller No. 16
YAKIMA, Fork Adapter for Bike Rack, 20 mm x 110 mm
  • Secure your fat bike: This fork adapter allows you to put your 15 mm thru-axle fork on any 9 mm fork mounted bike rack
  • High compatibility: Compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9 mm fork mounts
  • Durable quality: Durable black powder coat finish
  • Safety first: Built-in safety tabs
  • We’ve got your back guarantee: Covered by our Limited Lifetime Warranty
SaleBestseller No. 17
YAKIMA, Locking BedHead Bike Mounting System for Truck Beds
  • Truck bed bike fork mount: Allows you to attach your bike to the inside lip of your truck bed rail without any drilling
  • Compatible with front hub bikes: Fits bikes with 9 mm x 100 mm front hubs
  • Built to last: Corrosion-resistant anodized construction is built to withstand the elements; Soft padding to protect your vehicle’s paint job
  • Locks up safely: Locking single-sided adjustment skewer with long throw for easy bike loading; SKS (Same Key System) Lock Core included
  • Easy install: Basic assembly takes 5 minutes
Bestseller No. 18
Yakima - WheelHouse Roof Mounted Bike Rack
  • Universal skewer: A premium, universal wheel fork that works with all new wheel and axle sizes; Keeps your wheel snug
  • Smart design: Universal bar attachment with SpinVice clamps; Double wheel retention with axle and ZipStrips
  • Quick install: Tool-free installation in 5 minutes or less
  • Same Key System: Lockable to crossbars (accepts 1 SKS lock)
  • We’ve got your back guarantee: Covered by our Limited Lifetime Warranty
SaleBestseller No. 19
YAKIMA - Locking BlockHead Permanent Locking Fork Mount Bike Rack for Transporting Bikes on Trucks...
  • Bolt anywhere bike mount: A safe way to transport bikes on most truck beds and trailers with flat beds
  • Compatible with fork-style: Fits most bikes with 9mm x 100mm front hubs; Open design works with bikes with disk brakes
  • Built to last: Corrosion-resistant anodized construction is built to withstand the elements
  • Locks up safely: Locking single-sided adjustment skewer with long throw for easy bike loading; SKS Lock Core included
  • Easy install: Basic assembly takes 5 minutes and requires 2 bolts
Bestseller No. 20
Yakima - BlockHead Bike Mount
  • Bolt anywhere bike mount: A safe way to transport bikes on most truck beds and trailers with flat beds
  • Compatible with fork-style: Fits most bikes with 9mm x 100mm front hubs; Open design works with bikes with disk brakes
  • Built to last: Corrosion-resistant anodized construction is built to withstand the elements
  • Loads up easily: Single-sided adjustment skewer with long throw for easy bike loading; Get out of town and on the trail faster
  • Easy install: Basic assembly takes 10 minutes and requires 2 bolts

Last update 2021-06-24 at 21:23